2016 Ford Fusion Tires

Many owners have tire rotation performed alongside an oil change or at each service visit so wear can be checked regularly. The vehicle’s manufacturer schedule settles the interval, while driving conditions and tire wear can make an inspection useful sooner.

• Rotation helps distribute corner-specific wear.
• Tread depth is measured on all four tires.
• The tire pressure monitoring system is reset after pressure is set.

The inspection compares wear across all four tires and helps identify whether rotation or replacement should be recommended. The tires actually fitted to the Fusion determine the applicable rotation procedure.

• All four tires receive a tread-depth measurement.
• Rotation follows the vehicle and tire configuration.
• Service recommendations are based on inspection results.

Directional tread can limit how a tire moves from one side to another, and staggered fitments can also change the permitted rotation. The vehicle’s drivetrain and the tire configuration must be considered together rather than selecting one pattern for every car.

• Directional tires may need to remain on the same side.
• Staggered fitments can limit front-to-rear movement.
• The technician confirms the procedure during inspection.

On an all-wheel-drive vehicle, mismatched tread depth can load the driveline, which is why replacement decisions differ from those for a two-wheel-drive vehicle. An inspection compares the set and identifies whether individual replacement or replacement of the full set is the appropriate recommendation.

• Uneven tread wear can affect the replacement decision.
• The drivetrain influences acceptable tread-depth differences.
• Inspection results determine the service recommendation.

Vibration at highway speed is another reason to schedule an inspection. Measuring all four tires provides a clearer picture than judging one tire by appearance, and the technician can recommend rotation or replacement from what is found.

• Check for uneven wear across the set.
• Look for a tread indicator level with the tread.
• Schedule an inspection after noticeable highway vibration.

The service visit includes tread-depth measurement on all four tires, rotation or replacement recommendations based on the inspection, pressure adjustment, and a tire pressure monitoring system reset. David McDavid Ford is located at 300 West Loop 820 South in Fort Worth, Texas.

• Schedule an appointment online.
• Call 817-420-7990 to speak with the service department.
• Ask about current service specials.