David McDavid Ford

2016 Ford Fusion Coolant

Ford Coolant service at David McDavid Ford in Fort Worth, TX

Frequently asked questions

Frequently Asked Questions

6 common questions answered

What are the signs a 2016 Ford Fusion needs a coolant service?Signs include a higher-than-usual temperature gauge, a sweet smell, a puddle under the front of the vehicle, or coolant that looks rusty, cloudy, or low.

These symptoms can reflect depleted coolant or a leak, so an inspection helps identify the cause. The cooling system is under pressure and hot after running; checking it should be done only when the system is cold.

  • Temperature gauge running higher than usual
  • Sweet smell or puddle beneath the front of the vehicle
  • Rusty, cloudy, or low coolant in the reservoir
What is included in a coolant service on a 2016 Ford Fusion?The service drains and refills the coolant, pressure tests the system, and inspects the hoses, cap, radiator, and water pump area.

The refill uses the type and concentration the manufacturer specifies for this vehicle. Pressure testing helps distinguish scheduled maintenance from a leak that requires repair.

  • Drain and refill with manufacturer-specified coolant
  • Cooling-system pressure test for leaks
  • Inspection of hoses, cap, radiator, and water pump area
How often should the coolant in a 2016 Ford Fusion be changed?The manufacturer's published maintenance schedule settles when coolant service is due for a 2016 Ford Fusion, and its condition can be tested at a service visit between scheduled points.

The schedule calls for cooling-system inspection every 10,000 miles and coolant flush or replacement every 100,000 miles. A service visit can also identify a leak or condition that needs attention sooner.

  • Cooling-system inspection follows the manufacturer schedule
  • Coolant condition can be tested between scheduled points
  • A leak may require inspection and repair sooner
What kind of coolant does a 2016 Ford Fusion use?The manufacturer specifies the coolant type for a 2016 Ford Fusion, and coolants are not interchangeable.

Colour is not a reliable guide to what is in the bottle, so selecting fluid by appearance can be misleading. David McDavid Ford uses the manufacturer's specification for the vehicle rather than guessing from colour.

  • Follow the manufacturer's coolant specification
  • Do not assume different coolants can be mixed
  • Do not use colour alone to identify coolant
Can I just top off the coolant in a 2016 Ford Fusion?Topping off restores the coolant level but does nothing for the additive package, and a level that keeps dropping indicates a leak rather than normal consumption.

Because the cooling system can be hot and pressurized after driving, checking it should be done cold. Book an inspection if the reservoir is low or the level falls again after topping off.

  • Level restoration is not the same as coolant service
  • Repeatedly low coolant can indicate a leak
  • Check the system only when it is cold
How do I book cooling system service at David McDavid Ford in Fort Worth?You can schedule an appointment online or call David McDavid Ford at 817-420-7990.

The Fort Worth Service Department can evaluate coolant condition, pressure test the system, and inspect related components. You can also check current service specials before booking.

  • Schedule online through the service appointment page
  • Call 817-420-7990 for assistance
  • Visit 300 West Loop 820 South in Fort Worth