2012 Ford Edge Tires in Fort Worth, TX | David McDavid Ford

A tire inspection is useful whenever the vehicle is serviced because wear can differ between positions. David McDavid Ford can measure all four tires and determine whether rotation is appropriate for the fitted drivetrain and tires.

• Rotation helps distribute position-specific wear.
• The drivetrain affects the applicable rotation pattern.
• Service history helps establish the next visit.

The rotation follows the manufacturer-specified pattern for the vehicle, drivetrain, and tires fitted. The inspection can also reveal uneven wear, vibration concerns, or a tread-wear indicator level with the tread.

• All four tires receive a tread-depth measurement.
• Pressure is adjusted to the vehicle placard specification.
• Rotation or replacement is recommended from the inspection.

The vehicle is offered with both front-wheel drive and all-wheel drive across its trims, so the drivetrain must be confirmed during service. Directional tread and staggered fitments can change the pattern, which is why the technician should inspect the actual tires before moving them.

• Front-wheel-drive models place greater working demand on the front tires.
• All-wheel-drive models benefit from closely matched tread depth.
• Directional tread can limit where a tire may be moved.

An all-wheel-drive 2012 Ford Edge needs close tread matching because differing tire circumference can load the driveline. A front-wheel-drive Edge may allow more flexibility, but replacing only some tires still requires attention to the remaining tires and their condition.

• All-wheel-drive vehicles are sensitive to mismatched tread depth.
• Uneven wear can make a partial replacement unsuitable.
• The fitted tires and service history guide the recommendation.

A tread-depth indicator moulded into the tire that is level with the tread is a clear replacement signal. A failed penny test, uneven tread wear, or vibration at highway speed also warrants inspection by a service professional.

• Check whether a tread-wear indicator is level with the tread.
• Watch for uneven wear across the tire set.
• Report vibration at highway speed for evaluation.

The visit includes tread-depth measurements on all four tires and a rotation or replacement recommendation based on what the technician finds. Service is available at 300 West Loop 820 South in Fort Worth, and you can review current service specials before booking.

• Choose the online appointment scheduler.
• Call the Fort Worth service department directly.
• Request tire inspection and drivetrain-appropriate service.