2022 Ford Explorer Tires in Fort Worth, TX

For the 2022 Ford Explorer, the manufacturer's published schedule calls for rotating and adjusting wheel-and-tire air pressure every 10,000 miles. Earlier inspection may be appropriate when wear or vibration appears.

• Measure tread on all four tires.
• Check for uneven wear across the set.
• Reset the tire pressure monitoring system after adjustment.

The inspection also helps identify vibration, uneven wear, or a tread-depth indicator showing level with the tread. Any replacement recommendation is based on the condition of the tires fitted to the vehicle.

• Tread depth measurement on all four tires.
• Rotation based on drivetrain and tire configuration.
• Pressure adjustment and monitoring-system reset.

The Explorer is offered in configurations with different drivetrains, so the correct pattern must be confirmed during service. The technician also checks whether the tires are directional or whether front and rear fitments differ before moving them.

• Confirm the vehicle's actual drivetrain.
• Inspect the tire markings and fitment.
• Follow the manufacturer-specified rotation pattern.

On an all-wheel-drive Explorer, mismatched tread depth can load the driveline, so the replacement decision deserves careful measurement. On a two-wheel-drive configuration, the inspection and service history help determine whether fewer than four tires can be considered.

• Measure tread depth across every tire.
• Compare wear between axles.
• Use the vehicle's drivetrain and tire setup to guide the recommendation.

Uneven tread wear across the set can indicate that rotation or adjustment is due. Highway-speed vibration is another reason to have the tires inspected, and the final recommendation depends on the condition of the tires fitted.

• Look for a moulded tread-depth indicator at tread level.
• Use a penny test as a general check.
• Book an inspection for vibration or uneven wear.

The Fort Worth Service Department can measure all four tires, rotate them according to the vehicle's setup, adjust pressure, and reset the monitoring system. Visit the dealership at 300 West Loop 820 South, Fort Worth, TX 76108.

• Choose a service appointment online.
• Call 817-420-7990 for assistance.
• Ask about current service specials.