2020 Ford Mustang Tires

The manufacturer’s published schedule for the 2020 Ford Mustang calls for wheel and tire rotation every 10,000 miles. An inspection can also identify uneven wear that may justify attention sooner. Rotation helps the four tires wear more evenly.

• Measure tread depth on all four tires.
• Check for uneven wear across the tread.
• Follow the manufacturer-specified rotation pattern.

The inspection considers the condition of all four tires rather than looking at only one corner. After the service, the technician can recommend rotation or replacement based on the wear found. Schedule service at David McDavid Ford in Fort Worth.

• All-four-tire tread measurement.
• Rotation based on drivetrain and tire fitment.
• Pressure adjustment and monitoring-system reset.

The correct sequence should be confirmed during service rather than assumed from the vehicle name alone. The technician checks the tires and applies the manufacturer-specified pattern for the applicable configuration. This approach helps avoid moving a directional or differently sized tire where it should not go.

• Drivetrain affects how the tires are loaded and used.
• Directional tread can limit tire movement between sides.
• Staggered fitments can limit front-to-rear movement.

A two-wheel-drive vehicle may allow more flexibility when one tire is damaged, while an all-wheel-drive vehicle requires close tread depth across all four because a mismatched set can load the driveline. The tires actually fitted and the service history help determine the appropriate recommendation for your Mustang.

• Compare tread condition across the complete set.
• Inspect for damage, uneven wear, or visible indicators.
• Consider the drivetrain and tires currently fitted.

Drivers may first notice vibration at highway speed or tread wearing unevenly across the set. A tread-depth measurement on all four tires gives a clearer basis for deciding whether rotation is appropriate or replacement should be recommended.

• Look for a tread-depth indicator level with the tread.
• Use the penny test as a general visual check.
• Have vibration or uneven wear inspected promptly.

The service team in Fort Worth can measure the tires on your Mustang, complete the applicable rotation, and recommend rotation or replacement based on the inspection. You can also check current service specials before choosing an appointment time.

• Request tread measurement for all four tires.
• Ask for the manufacturer-specified rotation.
• Visit 300 West Loop 820 South, Fort Worth, TX 76108.