2018 Ford Transit Connect Coolant in Fort Worth, TX

These symptoms can reflect depleted coolant protection or a leak. A pressure test helps determine whether the system is holding pressure, while an inspection checks related components. Do not check a hot cooling system because it is under pressure; inspection should be done cold.

• Temperature gauge running higher than usual
• Sweet coolant smell or a puddle beneath the front
• Rusty, cloudy or low coolant in the reservoir

The inspection covers the hoses, cap, radiator and water pump area. These steps help identify both maintenance needs and leaks requiring repair. David McDavid Ford can test the cooling system and coolant condition before recommending the next step.

• Drain and refill with the specified coolant mixture
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator and water pump area

That schedule should guide replacement rather than appearance alone. Coolant condition can also be tested during a service visit between scheduled points, especially when symptoms appear. A pressure test and inspection help determine whether the vehicle needs routine coolant service or leak repair.

• Follow the manufacturer's maintenance schedule
• Have coolant condition tested during service
• Book an inspection for leaks or temperature changes

Coolants are not interchangeable, so choosing by convenience can reduce intended system protection. Color is not a reliable guide to what is in the bottle. David McDavid Ford can use the manufacturer-specified coolant type and concentration during service.

• Use the type specified by the manufacturer
• Do not treat different coolants as interchangeable
• Do not identify coolant by color alone

Adding fluid may temporarily bring the reservoir to the correct level, but it does not replace depleted protection. A recurring low level is not normal consumption to ignore. Never open the cooling system while it is hot or pressurized; check it cold and book an inspection if the level falls again.

• Top-off fluid does not renew depleted additives
• A repeatedly low level can indicate a leak
• Check the system only when it is cold

The Fort Worth service team can test coolant condition, pressure-test the system and inspect the hoses, cap, radiator and water pump area. Review service specials before your visit. The dealership is located at 300 West Loop 820 South, Fort Worth, TX 76108.

• Schedule online through the service appointment page
• Call 817-420-7990 for assistance
• Visit the West Loop 820 South service facility