Please wait while the page loads...

How many miles can you drive with the check engine light?

It could be anything from a detrimental sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we recommend that you pull over and contact David McDavid Ford to help choose if your vehicle is protected to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2016 Ford Fusion is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few personal ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a mixture of things for your 2016 Ford Fusion. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can indicate a variety of gargantuan things. It can be as clear as your gas cap being loose or as curious as engine knocking. If your check engine light is on in your 2016 Ford Fusion, contact David McDavid Ford. Contact David McDavid Ford today! Our Ford service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

2016 Ford Fusion Check Engine Light

A flashing light expresses that the problem is hazardous and if not taken care of hastily may result in startling damage to the car. If the check engine light in your 2016 Ford Fusion starts flashing, that means that the problem needs quick attention and your Ford should be brought in hastily. This blinking light usually indicates a strict engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can promptly gain the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can specifically be the cause. A bad, classical or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive experts at David McDavid Ford quickly by calling 8174207990.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The noble news, David McDavid Ford offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more immense failure like a detrimental catalytic converter or a problem with one of the car's oxygen sensors, so it noble to get the practical code reading and diagnosis.

Will the check engine light reset itself?

The check engine light on your 2016 Ford Fusion will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going reasonable, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Ford Fusion light will go off after about 20-40 miles. If you drive over that payment and the light is still on, you will need to bring it in to David McDavid Ford so the light and code can be double-checked and reset.

Is it safe to drive your 2016 Ford Fusion with the check engine light on?

If the check engine light is flashing, this means that there is a important issue and it is recommended to service your Ford Fusion immediately. This question is not extremely fitting because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to drive. This is typically indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more apt problem. Call the consultants at David McDavid Ford by dialing 8174207990 so you can describe the issues. Or reduce your speed and bring your 2016 Ford to our certified mechanics as soon as potential.

What could cause the check engine light to come on in a 2016 Ford Fusion?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a precarious problem that could cause precarious damage to your engine and come with a extensive repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow naturally means something less precarious but a flashing check engine light expresses that your vehicle’s engine is in precarious trouble and service is needed hastily. If your check engine light is flashing in your 2016 Ford Fusion, we highly advocate not to travel to work the vehicle and schedule Ford service today. Below is a list of the most conscious reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less humane when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Ford Fusion's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the right fluctuate of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • The battery is low or dead. The battery in your 2016 Ford Fusion is every essential. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The cost of a new one depends on the type of Ford you drive, but check our ongoing service coupons and specials.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2016 Ford Fusion’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why David McDavid Ford offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it fixed, your 2016 Ford Fusion will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause diverse problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ford Fusion is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to cognizant changes, like altitude. If your Ford Fusion is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • One of the most ordinary and countless cause is that your 2016 Ford Fusion gas cap is loose, damaged or missing. The gas cap for your 2016 Ford Fusion serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on hastily after you put gas in your 2016 Ford Fusion, authentic thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or diverse item can wreak havoc on your 2016 Ford Fusion if it’s not installed properly. These aftermarket components and accessories can deposit the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound amiable, deliver your Fusion to Ford and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, highly aftermarket parts and accessories, or using OEM components authentic place might cost a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • New Spark Plugs or Plug Wires are necessary for your 2016 Ford Fusion. The spark plugs are the part of your engine that ignites the air/fuel fluctuate in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, best to more pricey repairs.
  • Your 2016 Ford Fusion has a vacuum leak. Every Ford Fusion has a vacuum system that performs a wide assortment of functions. The vacuum system also helps lower bad emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dehydrated out and crack, highly if they’re exposed to exciting heat or extreme brisk.

Check Engine Light Service 2016 Ford Fusion

What do you do when you’re driving along in your Ford Fusion and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a scant because you have scant idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t determine you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Ford Fusion checked as soon as possible. Ignoring that warning could end up causing mighty damage to expensive engine parts.

When your 2016 Ford Fusion's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t individual, a computer turns on your check engine light. This amber or yellow light is regularly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is prefer with an electronic scan tool that is used by our Ford auto repair mechanics at David McDavid Ford. There are also a number of relatively low-cost code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced experienced to mean the issue and repair it.

2016 Ford Fusion Check Engine Light Flashing

Although there are bountiful conceivable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several accepted causes including something as prevalent as a loose gas cap. Additional accepted reasons for a Check Engine Light are faulty head gasket, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty emissions control part, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as essential to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every 2016 Ford Fusion was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the automobile on its essential systems. The sensors are continuously detecting conditions while sending data to the electronic control team. If the electronic control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is awry nor what to do about it. That’s where we come in; David McDavid Ford provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

2016 Ford Fusion Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard abruptly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also respectable as the OBD (on-board computer diagnostic system) in your Fusion. There are hundreds of disparate codes that your check engine light can indicate. While that sounds daunting, with a little patience, tackling basic diagnostics will give you beneficial knowledge about your vehicle and will also allow that Check Engine Light to do what it is truly supposed to do: be your guide. Unfortunately, discernable and beneficial vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of consistent OBD codes, there are also hundreds of consistent reasons for the light, including:

  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • O2 Sensor
  • Old Battery
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues
  • Ignition system faults
  • Transmission issues

This is why it is abhorrent for someone who does not have a few of automotive knowledge to not assume what a code means. If the engine light comes on due to a perilous concern, you risk damaging your car further by not repairing the issue right away. Call David McDavid Ford at 8174207990 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out suddenly by a certified Ford mechanic.