2015 Ford Flex Tires in Fort Worth, TX | David McDavid Ford

Regular inspections help catch uneven wear before it becomes obvious from the driver's seat. The correct timing also depends on the vehicle's drivetrain, use, and tire condition. David McDavid Ford can review the tires and service history together.

• Measure tread depth on all four tires.
• Check for uneven wear or vibration.
• Rotate according to the applicable manufacturer guidance.

The inspection compares the tires at all four corners and supports a recommendation for rotation or replacement. It also gives the technician an opportunity to identify visible wear concerns. The final recommendation is based on the condition of the tires actually fitted.

• Tread depth measured on all four tires.
• Rotation based on drivetrain and tire configuration.
• Pressure setting and monitoring-system reset.

Directional tread and staggered fitments can change the appropriate movement between wheel positions, so a specific pattern should not be assumed without inspection. The manufacturer guidance and the tires actually fitted determine the correct procedure. A technician can confirm the applicable arrangement during service.

• Confirm whether the vehicle is front-wheel drive or all-wheel drive.
• Check whether the tread is directional.
• Inspect for a staggered fitment before rotating.

On an all-wheel-drive vehicle, mismatched tread depth can load the driveline, which is why replacement decisions differ from those for a two-wheel-drive vehicle. A front-wheel-drive configuration may allow a different recommendation, but the tires should still be inspected as a set. David McDavid Ford can base the advice on measured condition.

• Compare tread depth across all four tires.
• Check for damage, uneven wear, or vibration.
• Consider the vehicle's drivetrain and fitted tires.

These signs should lead to an inspection rather than a guess about remaining service life. Tread depth can differ from one corner to another, particularly when the vehicle is used regularly or carries varying loads. A tire service appointment provides measurements and a recommendation based on what is found.

• Look for uneven tread wear across the set.
• Pay attention to vibration at highway speed.
• Check the molded tread indicator or perform a penny test.

Choose tire service and bring the 2015 Ford Flex in for tread measurement, rotation assessment, pressure setting, and a monitoring-system reset. The inspection determines whether rotation or replacement is the appropriate next step. You can also review current service specials before scheduling.

• Schedule online through the service appointment page.
• Call 817-420-7990 for assistance.
• Visit 300 West Loop 820 South, Fort Worth, TX 76108.