2015 Ford Flex Coolant in Fort Worth, TX

These symptoms can indicate depleted coolant protection or a leak that needs diagnosis. The cooling system is under pressure and hot after running, so checking it should be done cold. A pressure test at David McDavid Ford helps identify whether service or repair is needed.

• Temperature gauge running higher than usual
• Sweet smell or puddle beneath the front
• Rusty, cloudy, or low coolant in the reservoir

The refill uses the coolant type and concentration the manufacturer specifies for this vehicle. Testing helps separate coolant condition from a leak requiring repair. The system should be checked cold because it remains pressurized and hot after operation.

• Drain and refill with the specified coolant
• Cooling-system pressure test
• Inspection of hoses, cap, radiator, and water pump area

There is no single condition-based answer that replaces the manufacturer’s schedule. Coolant condition can also be tested during a service visit between scheduled points, especially when symptoms appear. A pressure test can identify a leak separately from coolant that needs servicing.

• Follow the manufacturer’s maintenance schedule
• Test coolant condition during service visits
• Investigate symptoms or a falling coolant level

Coolants are not interchangeable, so the correct product and concentration should be confirmed for this vehicle before servicing. Colour is not a reliable guide to what is in the bottle. David McDavid Ford can drain and refill the system according to the manufacturer’s specification without relying on colour alone.

• Use the manufacturer-specified coolant type
• Follow the specified concentration
• Do not choose coolant by colour alone

If the level keeps dropping, the vehicle may have a leak rather than normal coolant consumption. Do not open the system while it is hot or under pressure; checking should be done cold. Book an inspection so the coolant condition and system pressure can be evaluated together.

• Level restoration is not a complete coolant service
• A falling level can indicate a leak
• Have the system pressure tested when needed

The service department is located at 300 West Loop 820 South, Fort Worth, TX 76108. Tell the team you are bringing in a 2015 Ford Flex for coolant service and mention any temperature, smell, puddle, or reservoir concerns. The visit can determine coolant condition and whether a pressure-related repair is needed.

• Schedule online through the service appointment page
• Call 817-420-7990
• Visit 300 West Loop 820 South in Fort Worth