2014 Ford Explorer Coolant

These symptoms can reflect depleted coolant protection or a leak in the cooling system. A pressure test helps identify whether the system is holding pressure, while an inspection examines related components.

• Temperature gauge running higher than usual
• Sweet smell or puddle under the vehicle
• Rusty, cloudy or low coolant in the reservoir

The refill uses the coolant type and concentration the manufacturer specifies for this vehicle. The pressure test helps distinguish routine coolant service from a leak requiring repair.

• Drain and refill with specified coolant
• Cooling system pressure test
• Inspection of hoses, cap, radiator and water pump area

Coolant additives can deplete while the fluid still appears usable. A service visit can test coolant condition and pressure test the system between maintenance points.

• Coolant condition testing
• Pressure testing for leaks
• Inspection based on actual system condition

Color is not a reliable guide to what is in the bottle, so selection should follow the vehicle's manufacturer requirements. The correct type and concentration are used during the service.

• Follow the manufacturer-specified coolant type
• Do not treat coolant colors as interchangeable
• Verify the system during service

The cooling system is under pressure and hot after running, so checking it is done cold. A proper service evaluates coolant condition and pressure rather than masking a recurring loss.

• Check the system only when cold
• Do not use level alone to judge coolant protection
• Book an inspection if the level drops repeatedly

The Fort Worth service department can assess coolant condition, pressure test the system and inspect the listed components. Visit 300 West Loop 820 South, Fort Worth, TX 76108, and review service specials before your visit.

• Book through the online service scheduler
• Call 817-420-7990
• Visit 300 West Loop 820 South in Fort Worth