David McDavid Ford
2013 Ford Flex Coolant
Ford Coolant service at David McDavid Ford in Fort Worth, TX
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
6 common questions answered
What are the signs a 2013 Ford Flex needs a coolant service?Signs include a higher-than-usual temperature gauge, a sweet smell, a puddle under the front of the vehicle, or low, rusty, or cloudy coolant.
These symptoms can reflect depleted coolant, a leak, or another cooling-system condition. The system should be checked cold because it is pressurized and hot after operation. A pressure test helps identify whether a repair is needed.
- Temperature gauge running higher than usual
- Sweet smell or puddle beneath the front of the vehicle
- Rusty, cloudy, or low coolant in the reservoir
What is included in a coolant service on a 2013 Ford Flex?Service includes draining and refilling the coolant, pressure testing the system, and inspecting the hoses, cap, radiator, and water-pump area.
The refill uses the coolant type and concentration the manufacturer specifies for this vehicle. Pressure testing helps separate routine maintenance from a leak that needs repair. The system is checked cold, since it can be hot and pressurized after driving.
- Drain and refill with the manufacturer-specified coolant
- Pressure test for leaks
- Inspect hoses, cap, radiator, and water-pump area
How often should the coolant in a 2013 Ford Flex be changed?The manufacturer's published maintenance schedule settles when coolant service is due for a 2013 Ford Flex.
Coolant condition can also be tested during a service visit between scheduled points. Testing is useful because additive protection can decline while the fluid still looks and behaves like coolant. A pressure test can separately identify a leak or another cooling-system concern.
- Follow the manufacturer's maintenance schedule
- Have coolant condition tested at service visits
- Request a pressure test when level or temperature changes occur
What kind of coolant does a 2013 Ford Flex use?The manufacturer specifies the coolant type for the 2013 Ford Flex, and that specification should guide the refill.
Coolants are not interchangeable, so the correct product should be confirmed for this vehicle before service. Colour is not a reliable guide to what is in the bottle. A professional refill follows the manufacturer's specified type and concentration without relying on appearance.
- Use the manufacturer-specified coolant type
- Do not treat coolant colours as interchangeable labels
- Confirm the correct formulation before refilling
Can I just top off the coolant in a 2013 Ford Flex?Topping off restores the coolant level but does not restore the depleted additive package, and a level that keeps dropping indicates a leak that needs inspection.
Check the system only when it is cold; opening a hot, pressurized cooling system can cause injury. A top-off may temporarily correct the level, but it does not explain why the level changed. Book an inspection if the reservoir repeatedly becomes low or the temperature gauge rises.
- Adding coolant does not renew additive protection
- Repeatedly low coolant points to a possible leak
- Check the cooling system only when cold
How do I book cooling system service at David McDavid Ford in Fort Worth?You can schedule an appointment online or call David McDavid Ford at 817-420-7990.
The Fort Worth service team can assess coolant condition, pressure test the system, and inspect its key components. Visit David McDavid Ford at 300 West Loop 820 South, Fort Worth, TX 76108. You can also review current service specials before booking.
- Schedule online through the service appointment page
- Call 817-420-7990 for assistance
- Visit 300 West Loop 820 South in Fort Worth