David McDavid Ford
2013 Ford F-150 Coolant
Ford Coolant service at David McDavid Ford in Fort Worth, TX
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
6 common questions answered
What are the signs a 2013 Ford F-150 needs a coolant service?Common signs include a higher-than-usual temperature gauge, a sweet smell, a front-end puddle, or coolant that looks rusty, cloudy, or low.
These symptoms can point to depleted coolant protection or a cooling-system leak. The system should be checked cold because it is under pressure and hot after running. A pressure test and component inspection help identify the cause.
- Temperature gauge running higher than usual
- Sweet odor or puddle beneath the front of the truck
- Rusty, cloudy, or low coolant in the reservoir
What is included in a coolant service on a 2013 Ford F-150?Service includes draining and refilling the coolant with the manufacturer-specified type and concentration, pressure-testing the system, and inspecting key components.
The inspection covers the hoses, cap, radiator, and water pump area. This process checks both coolant condition and the possibility of a leak. Book through the schedule appointment page at David McDavid Ford.
- Drain and refill with the specified coolant
- Cooling-system pressure test for leaks
- Inspection of hoses, cap, radiator, and water pump area
How often should the coolant in a 2013 Ford F-150 be changed?The manufacturer's maintenance schedule settles when coolant should be changed for this vehicle.
Coolant condition can also be tested during a service visit between scheduled maintenance points. Additives deplete over time even when the fluid still appears normal, so appearance alone does not establish condition. The inspection can also distinguish coolant service from a leak requiring repair.
- Follow the manufacturer's maintenance schedule
- Test coolant condition during a service visit
- Pressure-test the system when a leak is suspected
What kind of coolant does a 2013 Ford F-150 use?The 2013 Ford F-150 uses the coolant type specified by its manufacturer, and different coolants are not interchangeable.
The correct formulation supports the system's aluminum and gasket surfaces. Colour is not a reliable guide to what is in the bottle, so coolant selection should be based on the manufacturer's specification and the vehicle configuration. A technician can verify the appropriate service approach.
- Use the manufacturer-specified coolant type
- Do not treat different coolants as interchangeable
- Do not use colour alone to identify coolant
Can I just top off the coolant in a 2013 Ford F-150?Topping off restores the coolant level but does not restore the depleted additive package or correct a leak.
A level that keeps dropping indicates a leak rather than normal consumption and calls for an inspection. Never open the cooling system while it is hot or pressurized; checking it is done cold. A pressure test can help locate the source of coolant loss.
- Adding coolant restores level only
- Repeatedly low coolant can indicate a leak
- Check the system only when it is cold
How do I book cooling system service at David McDavid Ford in Fort Worth?Book online through the schedule appointment page or call David McDavid Ford at 817-420-7990.
Share that your 2013 Ford F-150 needs coolant service so the visit can include a condition check, pressure test, and inspection. David McDavid Ford is located at 300 West Loop 820 South in Fort Worth, Texas. Ford Mobile Service and Pickup & Delivery options may support eligible service needs.
- Schedule online through the service appointment page
- Call 817-420-7990 for assistance
- Visit 300 West Loop 820 South, Fort Worth, TX 76108
Related Pages
Helpful Links