2024 Ford Maverick Coolant in Fort Worth, TX

These symptoms can indicate depleted coolant protection or a leak in the cooling system. The system is under pressure and hot after running, so checking it should be done only when cold. A pressure test helps distinguish a fluid-condition concern from a repair need.

• Temperature gauge running higher than usual
• Sweet smell or puddle under the front
• Rusty, cloudy, or low coolant

The inspection covers the hoses, cap, radiator, and water pump area. Pressure testing looks for leaks that may not be obvious from the outside. This process helps determine whether the vehicle needs coolant maintenance, a cooling-system repair, or both.

• Drain and refill with specified coolant
• Cooling-system pressure test
• Inspection of hoses, cap, radiator, and water pump area

No coolant replacement interval is established for this model year here, so the condition found during a service visit helps guide the decision. Coolant can be tested between scheduled maintenance points. A leak or low level should be inspected rather than addressed with repeated topping off.

• Follow the manufacturer’s maintenance guidance
• Test coolant condition during service
• Investigate a low level or recurring loss

Coolants are not interchangeable, and colour is not a reliable guide to what is in the bottle. A coolant service uses the manufacturer-specified type and concentration rather than selecting fluid by appearance. The service team can also check the system for leaks and inspect related components.

• Use the manufacturer-specified coolant
• Do not select coolant by colour
• Do not assume different coolants are interchangeable

Coolant additives can deplete while the fluid still appears usable. The cooling system is under pressure and hot after driving, so checking the level should be done cold. Repeatedly adding coolant can mask a condition that needs pressure testing and repair.

• Top-off restores level only
• Additives may still be depleted
• Recurring loss calls for a leak inspection

The service department is located at 300 West Loop 820 South, Fort Worth, TX 76108. A coolant visit can include condition testing, pressure testing, and inspection of the system’s main components. Review available service specials before booking.

• Schedule online through the service department
• Call 817-420-7990
• Visit 300 West Loop 820 South in Fort Worth