2023 Ford Explorer Alignment in Fort Worth, TX

General guidance is to check alignment every 2–3 years or 30,000 miles, after suspension work, or after a major pothole impact. Fort Worth road conditions can make an inspection worthwhile when the vehicle begins pulling or the tires show uneven wear. David McDavid Ford measures the current angles before recommending an adjustment.

• Check alignment after major pothole impacts.
• Inspect it after steering or suspension repairs.
• Look for uneven tread wear or an off-center steering wheel.

Wheels out of alignment scrub the tires as the Explorer rolls, which can wear one edge faster than the other. A vehicle that drifts on a flat road or has a steering wheel that is not centered should be inspected. The Fort Worth service team also checks steering and suspension components that may affect alignment.

• Vehicle pulls left or right on a flat road.
• Steering wheel sits off center while driving straight.
• One edge of a tire wears faster than the other.

The process begins with an inspection of the tires, steering, and suspension for wear that could hold the alignment out of specification. Current angles are measured on all four wheels, adjustments are completed where possible, and the results are reviewed. This gives drivers clear information before paying for an adjustment.

• Measure camber, caster, and toe on all four wheels.
• Adjust angles to factory specification where permitted.
• Inspect tires, steering, and suspension components.

An alignment corrects wheel angles, but it cannot repair a loose or worn suspension component. David McDavid Ford checks the Explorer’s steering and suspension before making adjustments and explains whether additional work is needed. This approach helps prevent repeated alignment concerns and supports predictable tire wear.

• Inspect tie rods for looseness or wear.
• Check ball joints and struts before adjustment.
• Review the recommended repair with the customer.

It becomes worthwhile after symptoms appear, a major pothole impact occurs, or a steering or suspension component is replaced. A measurement provides a factual comparison with factory specifications before an adjustment is recommended. This can confirm whether the vehicle needs service or whether its current alignment is within specification.

• Check for even tread wear across each tire.
• Watch for pulling or an off-center steering wheel.
• Measure angles after suspension component replacement.

The measurement helps determine whether an adjustment is needed before you pay for one. The inspection also looks for tire, steering, and suspension wear that could affect the result. To arrange service at David McDavid Ford, use the schedule appointment link.

• Receive current alignment-angle measurements.
• Identify wear that may affect alignment results.
• Learn whether adjustment is recommended.

Alignment concerns may follow a pothole impact, uneven road surface, or suspension repair. Symptoms such as pulling, an off-center steering wheel, or one-sided tire wear can indicate that the angles should be checked. If a worn tie rod, ball joint, or strut is found, that component may need attention before an alignment can hold properly. Bring your 2023 Ford Explorer to David McDavid Ford in Fort Worth for a factory-spec alignment — schedule service.

After the measurement and adjustment process, the technician reviews the before-and-after alignment readings and performs a road test when appropriate. The result is a clearer understanding of the vehicle’s current condition and whether the original symptoms have been addressed. For service at David McDavid Ford, schedule service or call 817-420-7990.

The service team handles alignment measurements, tire and suspension inspections, and factory-spec adjustments where applicable. If the inspection finds a worn component, the technician can explain how it may affect the alignment’s ability to hold. Visit David McDavid Ford in Fort Worth, TX, or call 817-420-7990 to discuss alignment service and appointment options.