2022 Ford Transit Crew Van Alignment: Specs & Service

That inspection can identify wear or impact damage that may affect alignment. An alignment is also appropriate when the van pulls on a flat road, the steering wheel is off center, or a tire develops uneven edge wear. David McDavid Ford in Fort Worth can measure the angles before recommending an adjustment.

• Inspect steering and suspension every 7,500 miles.
• Check alignment after noticeable impact or handling changes.
• Measure the angles before paying for an adjustment.

Misaligned wheels scrub the tires as the van moves, which can create uneven tread wear. The steering wheel may also sit crooked while the van travels straight. David McDavid Ford can inspect the tires, steering, and suspension before measuring the alignment angles.

• The van pulls to one side on a flat road.
• The steering wheel is not centered while driving straight.
• One edge of a tire wears faster than the rest.

The service begins with an inspection of the tires, steering, and suspension for wear that could prevent the alignment from holding. The technician then evaluates the wheel angles and makes permitted adjustments. This process helps identify whether the concern is an alignment issue or a worn component.

• Measure camber, caster, and toe on all four wheels.
• Inspect tires, steering, and suspension components.
• Adjust angles back to manufacturer specification where suspension allows.

Damaged or worn steering and suspension parts can cause wheel angles to change again after adjustment. David McDavid Ford checks those components along with the tires before recommending alignment work. You receive a clearer answer about whether the van needs an adjustment or additional inspection.

• Inspect steering and suspension components for wear.
• Look for tire conditions that can affect handling.
• Measure the angles before recommending an adjustment.

Not every tire or maintenance visit requires an alignment adjustment. Measurement is useful after a handling concern, uneven tread wear, or steering and suspension work. David McDavid Ford can determine whether an adjustment is needed instead of assuming one is required.

• Check for uneven tire wear.
• Inspect steering and suspension components.
• Adjust only where the suspension allows.

These components influence how consistently the wheels hold their intended angles. An inspection can identify wear before it contributes to pulling, an off-center steering wheel, or uneven tire wear. Fort Worth drivers can schedule the inspection with David McDavid Ford before alignment concerns become more noticeable.

• Follow the 7,500-mile steering and suspension inspection interval.
• Pay attention to changes in steering response.
• Have tire wear checked during service.

The technician measures camber, caster, and toe on all four wheels. Each angle affects how the van tracks, turns, and uses its tire tread. When the suspension design allows adjustment, the angles are brought back to the manufacturer's specification. The service is focused on measuring the actual wheel positions rather than assuming an alignment is needed.

Drivers should schedule service when the van pulls to one side, the steering wheel is off center, or one tire edge wears faster than the rest. David McDavid Ford in Fort Worth can evaluate the concern and explain whether an alignment adjustment is appropriate. Schedule service online.

Before adjustment, the tires, steering, and suspension are inspected for conditions that could push the angles out of specification. A worn or damaged component can prevent an alignment from holding, so identifying that condition is part of a responsible evaluation. The inspection also helps explain uneven tread wear, steering pull, or an off-center wheel.

Ford's published maintenance schedule calls for steering and suspension inspection every 7,500 miles. If your van develops a handling change or irregular tire wear, David McDavid Ford in Fort Worth can measure the current angles and determine whether an adjustment is needed. Bring your 2022 Ford Transit Crew Van to David McDavid Ford in Fort Worth for a factory-spec alignment — schedule service.

Service includes measuring camber, caster, and toe on all four wheels and adjusting those angles to the manufacturer's specification where the suspension permits. The technician also checks the tires, steering, and suspension for wear that could affect the result. That approach gives drivers a clearer explanation before an adjustment is recommended.

Visit David McDavid Ford at 300 West Loop 820 South, Fort Worth, TX 76108, or call 817-420-7990 for assistance. You can also schedule service online for your 2022 Ford Transit Crew Van.