2019 Ford Explorer Tires in Fort Worth, TX

The manufacturer’s published schedule calls for rotating or adjusting air pressure on the wheels and tires every 10,000 miles. Earlier inspection may be appropriate when wear or vibration appears. A service visit can measure all four tires and assess whether rotation is appropriate.

• Rotation follows the manufacturer-specified pattern.
• All four tires receive a tread-depth measurement.
• Pressure is set to the vehicle placard specification.

The inspection identifies uneven wear and helps determine whether rotation or replacement should be recommended. Tire service is also useful when the driver notices vibration at highway speed. The recommendation is based on what the technician finds on the installed tires.

• Tread depth is measured at all four wheel positions.
• The rotation pattern follows the vehicle and fitted tires.
• The tire pressure monitoring system is reset after pressure adjustment.

The drivetrain configuration should be confirmed during the service inspection rather than assumed from the engine information. The technician follows the manufacturer-specified pattern for the vehicle and checks whether the installed tires permit movement between positions. This approach avoids applying a pattern that does not suit the tire design.

• Directional tread can limit how a tire is moved.
• Staggered fitments can affect front-to-rear movement.
• The installed tires and vehicle configuration determine the appropriate pattern.

A tire inspection can compare tread wear across all four positions and identify damage or wear indicators. On an all-wheel-drive vehicle, mismatched tread depth can load the driveline, which is why replacement decisions differ from those for a two-wheel-drive vehicle. The vehicle configuration and tire condition should be confirmed during service.

• Compare tread wear across all four tires.
• Check for a tread-depth indicator level with the tread.
• Base replacement recommendations on the inspection and fitted tires.

The penny test is another general check a driver can use, but a professional inspection provides a broader assessment of all four tires. The service team can measure tread depth and identify whether the set can continue in service or whether replacement is recommended. Tire condition can vary from one wheel position to another.

• Look for uneven tread wear across the set.
• Pay attention to vibration at highway speed.
• Book an inspection when the penny test or wear indicator raises concern.

The service team can measure tread depth on all four tires, rotate them according to the manufacturer-specified pattern, adjust pressure, and reset the monitoring system. David McDavid Ford is located at 300 West Loop 820 South, Fort Worth, TX 76108. You can also review current service specials before booking.

• Request tire service for your 2019 Ford Explorer.
• Ask for all-four tire tread measurement.
• Call 817-420-7990 for assistance.