2018 Ford Transit-Wagon Oil Change in Fort Worth, TX

The same 10,000-mile interval applies to replacing the oil filter. Regular service helps the 3.7-liter V6 manage heat and carry away combustion byproducts. Fort Worth driving conditions, including stop-and-go traffic and towing, can make consistent maintenance especially important.

• Oil replacement every 10,000 miles
• Oil filter replacement every 10,000 miles
• Service records help document scheduled maintenance

David McDavid Ford’s service process follows the maintenance needs of the Transit Wagon’s V6 engine. The visit is also logged against the vehicle’s service history, giving you a clear record for future maintenance planning.

• Drain and refill with the manufacturer-specified oil grade and capacity
• Install a new oil filter
• Reset the oil-life monitor and check underhood fluids

The service department handles routine oil and filter maintenance for Ford vehicles using Ford-focused equipment and procedures. You can schedule an appointment online or review current service specials.

• Location: 300 West Loop 820 South, Fort Worth, TX 76108
• Online service scheduling is available
• Phone: (817) 420-7990

Engine oil carries heat and debris away from internal components, but its condition cannot be judged by appearance alone. A dark dipstick reading, low oil level, ticking, or a louder startup note can indicate that service deserves attention.

• Oil helps carry engine heat
• Oil helps transport debris away from internal components
• An oil-life reminder or overdue mileage can signal service time

The engine is paired with a six-speed automatic transmission and rear-wheel drive. It uses regular unleaded fuel and reaches peak power at 6,000 rpm and peak torque at 4,000 rpm.

• Engine layout: V6
• Displacement: 3,731 cc
• Drivetrain: rear-wheel drive

The range reflects differences among body configurations and wheelbases. The Transit Wagon’s overall length ranges from 217.8 to 263.9 inches, supporting a variety of passenger and cargo-use requirements.

• Cargo behind rear seats: 70.1–125 cubic feet
• Overall length: 217.8–263.9 inches
• Wheelbase: 129.9–147.6 inches

Actual towing capability varies by configuration, so drivers should match their trailer and equipment to the applicable trim specifications. The rear-wheel-drive layout and V6 engine support the Transit Wagon’s utility-focused design.

• Maximum towing range: 3,800–5,100 pounds
• Engine: 3.7-liter V6
• Transmission: six-speed automatic

The Transit Wagon uses regular unleaded fuel and has a 25-gallon fuel capacity. Driving conditions, passenger load, cargo, and towing can affect real-world fuel use.

• City fuel economy: 14 MPG
• Highway fuel economy: 18 MPG
• Fuel capacity: 25 gallons

Oil loses part of its additive package and its ability to carry heat and debris before it necessarily looks dirty. Drivers should pay attention to an oil-change reminder, mileage past the last service, a low or dark dipstick reading, or a ticking or louder engine note at startup. Bring your 2018 Ford Transit Wagon to David McDavid Ford in Fort Worth for an OEM-spec oil change — schedule service.

Fort Worth driving can include stop-and-go traffic, extended idle time, hot temperatures, dust exposure, and towing duty cycles. These conditions make it useful to follow the manufacturer’s 10,000-mile oil-change and oil-filter intervals rather than judging service solely by oil appearance. For assistance, call (817) 420-7990, visit the West Loop 820 facility, or schedule an appointment online.

Booking an oil change gets the oil and filter replaced and the visit logged against the vehicle’s history. David McDavid Ford’s broader service resources also support routine Ford maintenance in Fort Worth. Review service specials before booking, then schedule service online or call (817) 420-7990.