2018 Ford Taurus Alignment

The maintenance schedule for this model year does not establish a specific alignment interval. Alignment is best evaluated when driving conditions or handling symptoms suggest that wheel angles may have changed. David McDavid Ford can measure the current angles against factory specifications before recommending an adjustment.

• Consider an inspection after a major pothole impact.
• Have alignment checked after suspension component replacement.
• Use tire wear and steering behavior as practical warning signs.

Wheels out of alignment scrub the tires as the vehicle rolls, which can wear the tread unevenly and pull the steering off center. These symptoms can also relate to tire or suspension conditions, so an inspection helps separate alignment concerns from other causes. The service team checks the steering and suspension components that could hold an alignment out of specification.

• The vehicle pulls on a flat road.
• The steering wheel is not centered while driving straight.
• One edge of a tire wears faster than the other.

The process begins with an inspection of the tires, steering, and suspension for wear that could affect the readings. Current angles are measured against the factory specification, and adjustments are made where possible. Booking gives you the current angles measured against the factory specification, so you learn whether an adjustment is needed before paying for one.

• Camber, caster, and toe measurement on all four wheels.
• Inspection for tire, steering, and suspension wear.
• Adjustment to manufacturer specification where applicable.

An alignment cannot correct a loose or worn suspension component. David McDavid Ford inspects the relevant steering and suspension parts before recommending alignment work, then explains what was found. This approach helps identify a mechanical condition that may cause the Taurus to pull, wear tires unevenly, or return to an off-center steering position.

• Inspect tie rods for wear or looseness.
• Check ball joints and struts before alignment adjustment.
• Review tire condition and steering response with the inspection results.

A Taurus that tracks straight may not need an immediate adjustment, especially when tire wear is even and the steering wheel remains centered. Measurement is useful when you want to confirm the wheel angles rather than pay for an adjustment without evidence. David McDavid Ford can compare the readings with factory specifications and explain whether service is needed.

• Check after a major pothole impact.
• Check after replacing suspension or steering components.
• Check when tire wear becomes uneven.

The service measures camber, caster, and toe on all four wheels, checks related tire and suspension conditions, and explains whether adjustment is appropriate. You can schedule an appointment online or contact the dealership at 817-420-7990. The Service Department supports routine maintenance and complex mechanical service for Texas drivers.

• Location: 300 West Loop 820 South, Fort Worth, TX 76108.
• Online schedule service is available.
• Call 817-420-7990 with alignment questions.

Next, the technician measures camber, caster, and toe on all four wheels and compares the readings with the manufacturer’s specifications. Where the suspension allows, the angles are adjusted back to specification. This process is designed to address the wheel-angle condition rather than simply center the steering wheel. The current readings help determine whether adjustment is needed before you pay for one.

After adjustment, the vehicle is evaluated for steering response and road behavior. If worn tie rods, ball joints, struts, or another condition could prevent the alignment from holding, the team explains the finding before recommending additional work. Schedule service online or call 817-420-7990.

The David McDavid Ford Service Department is backed by over 70 years of automotive service in the local Fort Worth community. The facility is staffed by OEM-trained mechanics and specialized Ford Master Technicians with factory certifications across all eight major auto service categories. Genuine Motorcraft parts and specialized Ford service technology are used when repairs require replacement components.

For convenience, customers can use Ford Mobile Service for selected maintenance and recall updates, or ask about complimentary Ford Pickup & Delivery for more extensive repairs. To arrange an inspection for your Taurus, schedule an appointment or call 817-420-7990.

The inspection also considers the conditions that can make alignment readings unreliable or short-lived. Tires, steering components, and suspension parts are checked for wear, while issues involving tie rods, ball joints, or struts are evaluated before adjustment. A worn component can allow the angles to change again after service, so identifying that condition is part of a responsible alignment process.

After the measurements and any applicable adjustments, the vehicle’s steering response is evaluated. The goal is to address pulling, uneven tread wear, and an off-center steering wheel with measured information. Bring your 2018 Ford Taurus to David McDavid Ford in Fort Worth for a factory-spec alignment — schedule service.