2017 Ford Explorer Oil Filter in Fort Worth, TX

Replacing the filter with the oil removes the debris the filter has captured instead of carrying a loaded filter into another oil interval. The actual maintenance plan should also be considered alongside the vehicle's service history and the engine fitted to the Explorer.

• Filter replacement is paired with the oil service.
• The filter holds debris carried by the oil.
• The published interval is every 10,000 miles.

The filter is selected for the engine actually fitted to your SUV. After the oil service, the engine is run and the filter seal is checked for leaks. This process keeps the filter replacement connected to the oil service rather than treating it as a separate, incomplete task.

• Filter matched to the engine's specification.
• New drain plug gasket or washer where used.
• Leak check at the filter seal after the engine runs.

The engine still receives oil, but it may no longer receive oil that has passed through the filter. That change can happen quietly, which is why filter replacement is performed with the oil rather than stretched across two changes. An oil-pressure warning or an engine that sounds noisier than usual should prompt inspection.

• Captured debris loads the filter over time.
• The bypass valve can open when the filter loads.
• Fresh oil does not replace a loaded filter.

The 2017 Ford Explorer range includes engines from 2.3 to 3.5 liters and from four to six cylinders, so the engine actually fitted determines the correct filter. The service team matches the filter to that engine without relying on a one-size-fits-all approach. Fuel capability can also vary between regular unleaded and flex-fuel configurations.

• Engine displacement range: 2.3 to 3.5 liters.
• Cylinder range: four to six cylinders.
• Filter selection follows the engine fitted.

The filter holds debris from the oil, and a loaded filter may open its bypass valve so unfiltered oil circulates. Replacing it alongside the oil gives the fresh oil a clean filtering component. The manufacturer's published schedule calls for filter replacement every 10,000 miles, while service history helps determine the appropriate maintenance discussion.

• Oil and filter service address connected maintenance needs.
• A loaded filter may allow unfiltered oil circulation.
• The published filter interval is every 10,000 miles.

Share that your vehicle is a 2017 Ford Explorer and request oil and filter service. The team can match the filter to the engine fitted, renew the applicable sealing component, and check the filter seal after the engine runs. David McDavid Ford is located at 300 West Loop 820 South in Fort Worth, Texas.

• Online scheduling is available through the service department.
• Phone: 817-420-7990.
• Address: 300 West Loop 820 South, Fort Worth, TX 76108.