2017 Ford Expedition Coolant in Fort Worth, TX

These symptoms can reflect depleted coolant additives or a leak in the cooling system. The system should be checked cold because it is under pressure and hot after running. A service visit can test condition and pressure before the next step is chosen.

• Temperature gauge running higher than usual
• Sweet smell or a puddle under the front
• Rusty, cloudy, or low coolant in the reservoir

The replacement coolant is the type and concentration specified by the manufacturer for this vehicle. The pressure test helps identify a leak, while the inspection looks at components that contain and circulate coolant. Together, these checks distinguish routine service from a repair need.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator, and water pump area

Coolant condition can also be tested at a service visit between scheduled points. Testing is useful when the vehicle shows a symptom or when you want the system evaluated during other maintenance. A pressure test can identify a leak rather than simply confirming that service is due.

• Follow the manufacturer’s published schedule
• Have coolant condition tested during a service visit
• Use pressure testing when a leak is suspected

Coolants are not interchangeable, so the correct product should be selected for the vehicle rather than chosen by appearance. Colour is not a reliable guide to what is in the bottle. David McDavid Ford can service the system according to the manufacturer’s requirements.

• Use the manufacturer-specified coolant type
• Do not treat different coolants as interchangeable
• Do not use colour alone to identify coolant

A level that keeps dropping indicates a leak rather than normal consumption and calls for an inspection. Never open the cooling system while it is hot or under pressure; checking it is done cold. A pressure test can help identify whether the system needs repair.

• Top-off service does not renew coolant additives
• A repeatedly low level points to a possible leak
• Check the system cold, not after running

The Fort Worth service team can evaluate coolant condition, pressure-test the system, and inspect its related components. Include any temperature-gauge change, smell, puddle, or reservoir concern when arranging the visit. The address is 300 West Loop 820 South, Fort Worth, TX 76108.

• Schedule online through the service appointment page
• Call 817-420-7990 for assistance
• Visit 300 West Loop 820 South in Fort Worth