David McDavid Ford
2016 Ford Explorer Oil Filter
Ford Oil Filter service at David McDavid Ford in Fort Worth, TX
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
6 common questions answered
Is the oil filter replaced every time a 2016 Ford Explorer has its oil changed?Yes, the manufacturer’s published schedule calls for the oil filter on a 2016 Ford Explorer to be replaced every 10,000 miles.
Replacing the filter with the oil prevents collected debris from remaining in service through another oil change. The exact maintenance timing should also be considered alongside the vehicle’s service history and the manufacturer’s schedule.
- Filter replacement is performed with the oil service.
- The filter captures debris carried by engine oil.
- A leak check follows engine operation.
What is included in an oil filter replacement on a 2016 Ford Explorer?The service includes an engine-matched oil filter, a new drain plug gasket or washer where used, and a leak check after the engine runs.
The technician replaces the filter alongside the oil and checks the filter seal afterward. This process addresses both filtration and the sealing surfaces involved in the service.
- Filter matched to the engine’s specification.
- New drain plug gasket or washer where applicable.
- Inspection for leaks at the filter seal.
What happens if the oil filter on a 2016 Ford Explorer is not replaced?If the filter loads with debris and is not replaced, its bypass valve can allow oil to circulate without filtration.
A loaded filter does not stop the engine getting oil; it stops the engine getting filtered oil. Drivers may first notice an oil-pressure warning, unusual engine noise, or oil that darkens quickly after a change.
- Debris remains captured in an aging filter.
- The bypass valve may open once the filter loads.
- An inspection can evaluate warning signs or leaks.
Does a 2016 Ford Explorer need a specific oil filter?Yes, the filter is matched to the 3.5-liter V6 engine, and filters are not interchangeable across engines.
The correct filter depends on the engine fitted to the vehicle, rather than simply the vehicle name. David McDavid Ford can match the filter to the engine during the service without relying on a part number supplied by the driver.
- The engine displacement is 3.5 liters.
- The engine configuration is V6.
- The replacement is selected for that engine.
Can the oil be changed on a 2016 Ford Explorer without changing the filter?The oil can be changed separately, but the manufacturer’s published schedule calls for replacing the filter every 10,000 miles.
Changing the filter with the oil keeps the component that collected debris from remaining in service across another oil-change cycle. The vehicle’s service history and the manufacturer’s schedule help determine the appropriate maintenance decision.
- The filter holds debris carried by the oil.
- A loaded filter may allow unfiltered oil circulation.
- Filter replacement is performed alongside the oil.
How do I book an oil and filter service at David McDavid Ford?You can book online through the schedule appointment page or call David McDavid Ford at 817-420-7990.
The Service Department is located at 300 West Loop 820 South in Fort Worth, Texas. Online scheduling lets you request the service, while the dealership can provide information about current service specials.
- Use the online service scheduler.
- Call 817-420-7990 for assistance.
- Visit the Fort Worth service facility at 300 West Loop 820 South.
Related Pages
Helpful Links

