2016 Ford Expedition Brake Pads

Squealing or scraping may appear as the pad material becomes low. Grinding means the friction material is gone and the backing plate is contacting the rotor, so stop driving and book service. An inspection measures the remaining material on all four corners and checks the rest of the braking system.

• Measure pad material at all four corners.
• Inspect rotors, calipers, and hardware.
• Check brake fluid condition and braking response.

The inspection covers all four corners before replacement decisions are made. Rotors, calipers, hardware, and brake fluid are assessed together because brakes wear as a system. This helps determine whether pad replacement addresses the condition or whether additional attention is needed.

• Measure the remaining material on all four corners.
• Replace pads matched to the vehicle’s braking system.
• Inspect rotors, calipers, hardware, and brake fluid.

City traffic, towing, hills, and hard stops shorten pad life by increasing braking demand. There is no single driving pattern that sets a service point for every vehicle. Measuring the remaining material on all four corners shows whether replacement is needed now or can wait until the next visit.

• Frequent city stops increase brake use.
• Towing and hills add demand during deceleration.
• Pad measurement identifies the vehicle’s current condition.

Replacing pads while ignoring damaged or excessively worn related components can shorten the life of the new parts. The inspection includes rotors, calipers, hardware, and brake fluid, allowing the technician to determine the appropriate work for the braking system. The condition found during service answers whether rotor replacement is necessary.

• Inspect rotor condition during the brake service.
• Check calipers and hardware for related concerns.
• Assess brake fluid as part of the system review.

Grinding means the friction material is gone and the backing plate is on the rotor; stop driving and book it. Squealing, scraping, longer pedal travel, and increased stopping distance also call for prompt inspection. The braking system should be assessed as a whole before continued driving is considered.

• Stop driving if grinding indicates backing-plate contact.
• Book an inspection for longer pedal travel.
• Have all four corners and related components checked.

The Fort Worth service team can measure the remaining pad material on all four corners and inspect the braking system. Visit the dealership at 300 West Loop 820 South, Fort Worth, TX 76108. You can also review available service specials before scheduling.

• Request brake pad measurement for all four corners.
• Ask for inspection of rotors, calipers, hardware, and fluid.
• Call 817-420-7990 or book online in Fort Worth.