2016 Ford Edge Alignment

Alignment service is generally considered after symptoms appear, after suspension work, or following a major pothole impact. David McDavid Ford can measure the current angles against factory specifications before recommending an adjustment. This approach helps avoid paying for an alignment when the measurements do not indicate a need.

• Measurement of camber, caster, and toe on all four wheels
• Inspection of tires, steering, and suspension components
• Adjustment where the suspension allows

Wheels out of alignment scrub the tires as the 2016 Ford Edge rolls, which can create uneven tread wear and change steering feel. Drivers may notice the vehicle pulling on a flat road or the steering wheel sitting crooked while traveling straight. A measurement can identify whether camber, caster, or toe is outside specification.

• Vehicle pulls to one side on a flat road
• Steering wheel is off center while driving straight
• One edge of a tire wears faster than the other

The service begins with measurements and an inspection of the tires, steering, and suspension. If the suspension permits adjustment, the angles are corrected toward factory specification. Booking service at David McDavid Ford gives you current measurements so you can understand whether an adjustment is needed before paying for one.

• Camber, caster, and toe measurements
• Inspection for worn tires, steering, or suspension components
• Adjustment back to manufacturer specification where allowed

David McDavid Ford inspects suspension and steering components before recommending alignment adjustments. If a worn component is affecting the angles, correcting that condition may be necessary for the alignment to remain within specification. The inspection helps separate an alignment adjustment from a repair that affects steering or suspension operation.

• Tie rods can affect steering movement and toe
• Ball joints can affect wheel movement and alignment stability
• Struts can influence suspension position and tire contact

Some alignment issues first appear as uneven tire wear or an off-center steering wheel rather than an obvious pull. David McDavid Ford can measure all four wheels against factory specifications before recommending service. That lets you determine whether adjustment is appropriate instead of scheduling an alignment solely by habit.

• Check after a major pothole impact
• Check after steering or suspension work
• Check when tire wear becomes uneven

The service measures camber, caster, and toe on all four wheels and checks tires, steering, and suspension components for conditions that could hold an alignment out of specification. You can schedule an appointment online with the David McDavid Ford Service Department. The dealership can also provide current angle measurements before an adjustment is recommended.

• Fort Worth location: 300 West Loop 820 South
• Four-wheel angle measurement
• Online service scheduling available

The alignment process measures all four wheels and evaluates camber, caster, and toe. If the suspension permits adjustment, the angles are corrected toward the manufacturer's specification. If inspection identifies a condition that could affect alignment results, the findings help determine whether additional steering or suspension attention is appropriate.

The Service Department is located at 300 West Loop 820 South in Fort Worth, Texas. Visit David McDavid Ford or schedule service online for an alignment evaluation. You can also call 817-420-7990 for assistance.

Technicians check the tires, steering, and suspension before making adjustments. Worn tie rods, ball joints, or struts can prevent an alignment from holding, so identifying those conditions is part of determining whether an alignment alone is appropriate. Where the suspension allows, camber, caster, and toe are adjusted back to the manufacturer's specification.

The service provides current angle measurements against factory specification, allowing the driver to understand whether an adjustment is needed before paying for one. Bring your 2016 Ford Edge to David McDavid Ford in Fort Worth for a factory-spec alignment — schedule service.