2015 Ford F-150 Coolant

These symptoms can reflect depleted coolant protection or a leak in the cooling system. The system is hot and under pressure after driving, so checking it should be done cold. A service visit helps identify the condition of the coolant and whether pressure loss points to a repair.

• Temperature gauge running higher than usual
• Sweet smell or a puddle beneath the front of the vehicle
• Rusty, cloudy, or low coolant in the reservoir

The replacement coolant is the type and concentration the manufacturer specifies for this vehicle. The pressure test helps distinguish routine coolant service from a leak that needs repair. A technician can also assess the coolant’s condition during the visit and explain the next step based on what the system shows.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test
• Inspection of hoses, cap, radiator, and water pump area

There is no single interval to apply across every vehicle situation without consulting the applicable maintenance guidance. Coolant condition can also be tested during a service visit between scheduled points. If the fluid looks contaminated, the reservoir is low, or the level keeps dropping, the condition found during inspection determines the appropriate action.

• Follow the manufacturer’s maintenance schedule
• Have coolant condition tested during service
• Book an inspection if the level repeatedly drops

Using the correct coolant helps preserve the additive protection designed for the vehicle’s cooling-system materials. Colour is not a reliable guide to what is in the bottle, so it should not be used to choose a replacement fluid. David McDavid Ford can service the system using the manufacturer-specified coolant for this vehicle.

• Use the manufacturer-specified coolant type
• Do not assume different coolants can be mixed
• Do not choose coolant by colour alone

Adding fluid may temporarily correct a low reservoir, but it does not replace a complete coolant service or identify why the level changed. The cooling system should be checked cold because it is hot and pressurized after operation. Book an inspection if the reservoir repeatedly becomes low, or if you notice an odor, puddle, or temperature change.

• Level correction does not renew coolant additives
• Repeated coolant loss points to a possible leak
• Check the system only when it is cold

Describe the symptoms you have noticed, such as a high temperature gauge, sweet smell, puddle, or low reservoir. The visit can include a coolant condition check, pressure test, and inspection of the related components. You can also review service specials before visiting the service department.

• Choose an appointment time online
• Share any coolant warning signs when booking
• Visit 300 West Loop 820 South in Fort Worth