2015 Ford Explorer Alignment: Specs & Service

Those time and mileage guidelines are general service guidance rather than a factory interval. An alignment check is especially useful when the vehicle begins pulling or the steering wheel no longer sits straight. David McDavid Ford in Fort Worth measures the current angles before recommending an adjustment.

• Check alignment after major pothole impact.
• Consider service after suspension component replacement.
• Review tire wear and steering behavior between visits.

Wheels outside alignment specification can scrub the tires as the vehicle rolls, wearing tread faster on one edge. A technician at David McDavid Ford in Fort Worth can measure all four wheel angles and inspect the related steering and suspension components. The inspection helps separate an alignment concern from a worn part or tire issue.

• Vehicle pulls on a flat road.
• Steering wheel is off center while driving straight.
• One tire edge wears faster than the other.

The service begins with an inspection of tires, steering, and suspension components for wear that could hold the alignment out of specification. Current angles are compared with factory specifications before an adjustment is recommended. This process gives you measured information about whether adjustment is needed before paying for one.

• Camber measurement on all four wheels.
• Caster measurement on all four wheels.
• Toe measurement and adjustment where permitted.

That is why the tires, steering, and suspension should be inspected before adjustment. If a component is worn, the measured angles may change again after alignment service. David McDavid Ford can identify conditions that affect alignment results and explain whether an adjustment or additional repair is appropriate.

• Inspect tie rods for wear.
• Check ball joints and struts.
• Review tire condition before alignment adjustment.

It becomes more worthwhile after an impact, suspension work, or a change in steering feel. A measurement can confirm whether the wheel angles remain within the manufacturer's specifications before an adjustment is made. This approach helps avoid paying for an adjustment when the current angles do not require one.

• Look for even tread wear.
• Watch for pulling on a flat road.
• Schedule an inspection after a significant road impact.

This information helps show whether the wheel angles are within specification and whether adjustment is possible. The service also includes an inspection of tires, steering, and suspension components for wear that could affect the result. Contact David McDavid Ford in Fort Worth to arrange an alignment evaluation for your SUV.

• Measure all four wheel angles.
• Compare measurements with factory specifications.
• Identify component wear that may affect alignment.

Next, camber, caster, and toe are measured on all four wheels and compared with the manufacturer's specifications. Where the suspension allows adjustment, the angles are brought back toward those specifications. The process is designed to identify whether an adjustment is needed before you pay for one, rather than assuming every concern requires adjustment.

After measurement and adjustment, before-and-after angle information can show how the settings changed, followed by a road test to evaluate steering behavior. If worn components prevent the alignment from holding, the inspection gives you a clearer basis for the next repair decision. Schedule service at David McDavid Ford or call 817-420-7990.

Factory specifications provide the reference point for the inspection. The technician compares the current angles with those specifications and adjusts them where the suspension design allows. Tires, steering parts, suspension components, and tie rods are inspected first because looseness or wear can change the readings or prevent the settings from holding.

Symptoms such as pulling, an off-center steering wheel, uneven tread wear, or vibration at speed warrant an evaluation. Booking gives you measured information about the current angles before an adjustment is recommended. Bring your 2015 Ford Explorer to David McDavid Ford in Fort Worth for a factory-spec alignment — schedule service.

Local driving conditions can include potholes, road construction, and uneven pavement that may affect steering feel or tire wear. After a noticeable impact, a suspension repair, or a change in handling, an alignment inspection can establish whether the wheel angles remain within factory specification. The technician also checks for worn tires, steering components, and suspension parts before adjustment.

To arrange service, visit David McDavid Ford at 300 West Loop 820 South, Fort Worth, TX 76108. You can schedule an appointment online or call 817-420-7990 for assistance with your 2015 Ford Explorer alignment.