2014 Ford Flex Alignment in Fort Worth, TX

An alignment is generally considered after symptoms develop, following suspension work, or after a major pothole impact. Road impacts can change wheel angles even when damage is not immediately visible. David McDavid Ford can measure the current angles against factory specifications before recommending an adjustment.

• Request an inspection after a major pothole impact.
• Check alignment after steering or suspension repairs.
• Use measured readings to determine whether adjustment is needed.

These symptoms can indicate that the wheels are not tracking at the intended angles. Misalignment may scrub the tires as the vehicle rolls, accelerating wear on one edge. A technician should also inspect the steering and suspension because worn components can affect alignment results.

• Vehicle pulls on a flat road.
• Steering wheel sits off center while driving straight.
• One edge of a tire wears faster than the other.

The service also includes inspection of the tires, steering, and suspension components for wear that could prevent the alignment from holding. Booking gives you current angles measured against factory specifications, so you can learn whether an adjustment is needed before paying for one.

• Measure camber, caster, and toe on all four wheels.
• Inspect tires, steering, and suspension components.
• Adjust alignment angles where the suspension allows.

David McDavid Ford inspects the tires, steering, and suspension before recommending an adjustment. Components with wear can allow wheel angles to change again after service, so identifying the underlying condition matters. The inspection helps clarify whether the vehicle needs alignment adjustment, additional repair, or both.

• Check steering components for wear.
• Inspect suspension components that can affect alignment.
• Review tire condition for uneven wear patterns.

Measurement is useful after a major pothole impact or steering and suspension work, even when symptoms are subtle. It can show whether the current angles match factory specifications before an adjustment is recommended. This approach helps avoid paying for an unnecessary alignment while identifying conditions that may affect tire wear.

• Consider measurement after a significant road impact.
• Look for uneven wear during tire checks.
• Ask for factory-spec readings before adjustment.

The service measures all four wheel angles and includes inspection of tires, steering, and suspension components. Booking also provides current measurements against factory specifications, helping you understand whether adjustment is needed. You can schedule an appointment with the David McDavid Ford Service Department.

• Service location: 300 West Loop 820 South, Fort Worth, TX 76108.
• Measure camber, caster, and toe on all four wheels.
• Call David McDavid Ford at 817-420-7990.

Front and rear wheel positions are evaluated as part of the four-wheel measurement process. The inspection also covers tire condition, steering components, and suspension components that may contribute to uneven tread wear, pulling, an off-center steering wheel, or vibration at speed. If a worn component prevents the alignment from holding, the inspection helps identify that condition before adjustment is recommended.

Because a fixed manufacturer alignment interval is not specified for this model year, measurement is especially useful after a major pothole impact or steering and suspension work. Bring your 2014 Ford Flex to David McDavid Ford in Fort Worth for a factory-spec alignment — schedule service.

David McDavid Ford is located at 300 West Loop 820 South in Fort Worth, Texas. The Service Department checks the tires, steering, and suspension components before alignment adjustment, then compares the current angles with factory specifications. This process helps determine whether the vehicle needs an adjustment or whether component wear should be addressed first.

To arrange service, visit the service scheduler or call 817-420-7990. David McDavid Ford serves Fort Worth drivers from its West Loop 820 location and can help evaluate pulling, off-center steering, uneven tire wear, or other alignment concerns.