David McDavid Ford
2014 Ford Explorer Oil Filter
Ford Oil Filter service at David McDavid Ford in Fort Worth, TX
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
6 common questions answered
Is the oil filter replaced every time a 2014 Ford Explorer has its oil changed?The oil filter should be replaced with the oil when this service is performed on a 2014 Ford Explorer.
The filter captures debris carried by the oil and can load over time. Reusing it across separate oil changes can leave fresh oil working through a filter that has already collected contaminants. Service timing should follow the manufacturer's maintenance schedule and the vehicle's service history.
- Filter matched to the 3.5-liter V6 engine
- New drain plug gasket or washer where used
- Leak check after the engine runs
What is included in an oil filter replacement on a 2014 Ford Explorer?An oil filter replacement includes a correctly matched filter, a new drain plug gasket or washer where used, and a post-run leak check.
The filter is selected for the engine actually fitted to the Explorer. After the filter is installed and the engine runs, the filter seal is checked for leaks. Booking the service combines filter replacement with the vehicle's oil service.
- Engine-specific oil filter
- Renewed drain plug sealing piece where applicable
- Inspection of the filter seal after operation
What happens if the oil filter on a 2014 Ford Explorer is not replaced?A loaded filter can open its bypass valve, allowing oil to circulate without being filtered.
The engine does not necessarily stop receiving oil, which makes the issue easy to overlook. The concern is that debris captured by the filter may no longer be removed from circulating oil. An oil-pressure warning, increased engine noise, or oil that darkens quickly after a change warrants attention.
- Filtration may be reduced when the filter loads
- Oil can continue circulating unfiltered
- Inspection can identify leaks or service concerns
Does a 2014 Ford Explorer need a specific oil filter?Yes, the filter must be matched to the 3.5-liter, six-cylinder V6 engine, and filters are not interchangeable across engines.
The correct filter depends on the engine actually fitted to the vehicle. Using a filter intended for another engine can compromise fit or filtration. David McDavid Ford can match the filter to the Explorer's engine during service without relying on a universal component.
- 3.5-liter engine displacement
- Six-cylinder V6 configuration
- Filter selection matched to the fitted engine
Can the oil be changed on a 2014 Ford Explorer without changing the filter?The oil can be changed separately, but an oil and filter service replaces the filter at the same time.
Replacing the filter with the oil gives the new oil a clean filtering element. A filter that remains in service continues to hold the debris it has captured, and its bypass valve may open when it becomes loaded. The appropriate service timing depends on the manufacturer's maintenance schedule and the vehicle's service history.
- Fresh oil benefits from a clean filter
- Loaded filters can permit unfiltered circulation
- Service history helps guide maintenance decisions
How do I book an oil and filter service at David McDavid Ford in Fort Worth?Book online through the schedule appointment page or call David McDavid Ford at 817-420-7990.
The service team is located at 300 West Loop 820 South, Fort Worth, TX 76108. You can review service specials before booking. The appointment can cover a filter matched to the 2014 Ford Explorer's engine, the applicable drain plug sealing piece, and a post-run leak check.
- Schedule online through the service appointment page
- Call 817-420-7990 for assistance
- Visit the West Loop 820 South service location