2014 Ford Escape Coolant in Fort Worth, TX

These symptoms can reflect depleted coolant protection or a leak in the cooling system. A pressure test helps identify whether coolant is escaping, while inspection can locate areas requiring repair. Never check a cooling system immediately after driving because it can be hot and under pressure; checking it is done cold.

• Temperature gauge running higher than usual
• Sweet smell or puddle beneath the front of the vehicle
• Rusty, cloudy, or low coolant in the reservoir

The refill uses the coolant type and concentration the manufacturer specifies for this vehicle. The pressure test helps distinguish a service that is due from a leak that needs repair. Inspection findings determine whether additional cooling-system work is appropriate.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator, and water pump area

Coolant additives can deplete even while the fluid still appears to cool the engine. A service visit can test coolant condition and pressure-test the system between scheduled maintenance points. The condition found during inspection determines whether the vehicle needs a coolant service or leak repair.

• Coolant condition can be tested during a service visit
• Pressure testing checks for leaks
• Inspection findings guide the recommended next step

Coolants are not interchangeable, so the correct product should be selected according to the vehicle’s manufacturer requirements. Color is not a reliable guide to what is in the bottle or whether it is suitable. David McDavid Ford can use the specified coolant during service without relying on color alone.

• Use the manufacturer-specified coolant type
• Do not assume different coolant products are interchangeable
• Do not use color alone to identify coolant suitability

If the level keeps falling, the vehicle has a leak rather than normal coolant consumption. The cooling system is hot and under pressure after running, so checking it should be done cold. Book an inspection so the coolant condition and system pressure can be tested together.

• Adding coolant restores level only
• A repeatedly low level can indicate a leak
• Check the system cold, not immediately after driving

The service visit can assess coolant condition, pressure-test the system, and inspect the hoses, cap, radiator, and water pump area. Review service specials before booking if you are considering maintenance for your 2014 Ford Escape. The dealership is located at 300 West Loop 820 South, Fort Worth, TX 76108.

• Book through the online service scheduler
• Call 817-420-7990 for assistance
• Visit the Fort Worth service department at 300 West Loop 820 South