David McDavid Ford

2013 Ford F-150 Oil Filter

Ford Oil Filter service at David McDavid Ford in Fort Worth, TX

Frequently asked questions

Frequently Asked Questions

6 common questions answered

Is the oil filter replaced every time a 2013 Ford F-150 has its oil changed?Replacing the oil filter with the oil is the appropriate service approach for a 2013 Ford F-150 when an oil and filter service is booked.

The filter holds debris carried by the oil, and a loaded filter can open its bypass valve so unfiltered oil circulates. The manufacturer's maintenance schedule and the vehicle's service history help determine broader maintenance timing.

  • Filter matched to the engine
  • New drain plug gasket or washer where applicable
  • Leak check after the engine runs
What is included in an oil filter replacement on a 2013 Ford F-150?An oil filter replacement includes fitting the correct filter, renewing the applicable drain plug gasket or washer, and checking the filter seal for leaks.

The technician selects a filter matched to the engine actually fitted in the 2013 Ford F-150. After the engine runs, the filter seal is inspected so the service addresses both filtration and sealing.

  • Engine-specific oil filter
  • Replacement gasket or washer where the engine uses one
  • Post-service filter-seal leak inspection
What happens if the oil filter on a 2013 Ford F-150 is not replaced?If the oil filter is not replaced, debris can load the filter until its bypass valve opens and unfiltered oil circulates through the engine.

A loaded filter does not stop the engine getting oil; it stops the engine getting filtered oil, which can happen without an immediate dramatic warning. An oil-pressure warning, a noisier-than-usual engine, or oil that darkens quickly after a change should prompt service attention.

  • Debris remains held in an increasingly loaded filter
  • The bypass valve may allow unfiltered oil flow
  • Engine noise or an oil-pressure warning may be noticed
Does a 2013 Ford F-150 need a specific oil filter?Yes, the filter must be matched to the engine, and filters are not interchangeable across engines.

The 2013 Ford F-150 range includes six- to eight-cylinder engines with displacement from 3,496 to 6,210 cc. David McDavid Ford identifies the engine fitted and selects the corresponding filter without naming a part number or filter specification.

  • Six- to eight-cylinder engine range
  • 3,496- to 6,210-cc displacement range
  • Filter selection based on the engine installed
Can the oil be changed on a 2013 Ford F-150 without changing the filter?The oil can be drained and replaced without replacing the filter, but an oil and filter service replaces both together.

Reusing a loaded filter leaves the debris-capturing component in service and may allow the bypass valve to open. The manufacturer's maintenance schedule, an inspection, and the vehicle's service history determine the broader service decision; booking an oil and filter service addresses the filter at the same time.

  • Filter holds debris carried by engine oil
  • Loaded filters can permit unfiltered circulation
  • Oil and filter service replaces both components
How do I book an oil and filter service at David McDavid Ford in Fort Worth?Book online through the schedule appointment page or call David McDavid Ford at 817-420-7990.

Provide the 2013 Ford F-150 details so the team can match the filter to the engine fitted. David McDavid Ford is located at 300 West Loop 820 South, Fort Worth, TX 76108. You can also review current service specials before arranging the visit.

  • Online service scheduling
  • Call 817-420-7990
  • Visit 300 West Loop 820 South in Fort Worth