David McDavid Ford
2013 Ford Explorer Coolant
Ford Coolant service at David McDavid Ford in Fort Worth, TX
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
6 common questions answered
What are the signs a 2013 Ford Explorer needs a coolant service?Common signs include a higher-than-usual temperature gauge, a sweet smell, a puddle under the front of the vehicle, or low, rusty, or cloudy coolant.
These symptoms can point to depleted coolant protection or a leak in the cooling system. A pressure test helps determine whether the vehicle needs a coolant service or a repair. The system may be hot and under pressure after driving, so checking it should be done cold.
- Temperature gauge running higher than usual
- Sweet smell or a puddle under the front
- Low, rusty, or cloudy coolant in the reservoir
What is included in a coolant service on a 2013 Ford Explorer?The service drains and refills the coolant, pressure tests the system, and inspects the hoses, cap, radiator, and water pump area.
The replacement coolant is the type and concentration the manufacturer specifies for this vehicle. Pressure testing helps identify leaks, while the component inspection looks for conditions that could affect cooling performance. Book through schedule service at David McDavid Ford.
- Drain and refill with manufacturer-specified coolant
- Cooling-system pressure test for leaks
- Inspection of hoses, cap, radiator, and water pump area
How often should the coolant in a 2013 Ford Explorer be changed?The applicable manufacturer maintenance schedule settles when coolant service is due, while a service visit can test coolant condition between scheduled points.
There is no stated interval for this model year in the maintenance information used for this service page. That makes condition testing useful when symptoms appear or when you want the system evaluated. A pressure test also helps distinguish routine coolant service from a leak that needs repair.
- Follow the maintenance schedule for this vehicle
- Test coolant condition during a service visit
- Investigate any recurring drop in coolant level
What kind of coolant does a 2013 Ford Explorer use?The 2013 Ford Explorer uses the coolant type specified by its manufacturer, and the correct choice should be confirmed for this vehicle.
Coolants are not interchangeable simply because they look similar. Color is not a reliable guide to what is in the bottle, so coolant selection should follow the manufacturer’s specification rather than appearance. David McDavid Ford can drain and refill the system with the specified type and concentration.
- Use the manufacturer-specified coolant type
- Do not treat coolant colors as interchangeable
- Have the system evaluated before mixing products
Can I just top off the coolant in a 2013 Ford Explorer?Topping off restores the coolant level but does not restore the additive package, and a level that keeps dropping indicates a leak requiring inspection.
The cooling system is hot and under pressure after the vehicle runs, so checking it should be done cold. Adding fluid may temporarily raise the level without addressing depleted protection or the reason coolant was lost. Book an inspection if the reservoir repeatedly falls or a puddle, smell, or temperature change appears.
- Check the system only when it is cold
- Do not treat repeated coolant loss as normal consumption
- Schedule a pressure test when the level drops
How do I book cooling system service at David McDavid Ford in Fort Worth?You can schedule an appointment online or call David McDavid Ford at 817-420-7990.
The service team is located at 300 West Loop 820 South, Fort Worth, TX 76108. Tell the advisor about any temperature change, smell, puddle, or low reservoir so the visit can address the condition you noticed. You can also review current service specials before booking.
- Schedule online through the service appointment page
- Call 817-420-7990 for assistance
- Visit 300 West Loop 820 South in Fort Worth
Related Pages
Helpful Links

