2012 Ford Transit Connect Coolant in Fort Worth, TX

A low reservoir can also indicate that the system needs attention. The vehicle should be checked cold because a cooling system can be hot and pressurized after running. A pressure test helps distinguish aging coolant from a leak that requires repair.

• Temperature gauge running higher than usual
• Sweet smell or fluid puddle beneath the front of the vehicle
• Rusty, cloudy or low coolant in the reservoir

The replacement coolant uses the type and concentration specified by the manufacturer for this vehicle. The inspection is important because a fluid condition concern and a leak require different next steps. Service can help evaluate both parts of that question.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator and water pump area

Coolant additives deplete even while the fluid continues to cool the engine, which makes appearance an unreliable measure of protection. A service visit can test coolant condition and pressure between maintenance points. If the level is dropping, the system should also be inspected for a leak.

• Coolant condition can be evaluated during service
• Pressure testing checks for system leaks
• Condition found during inspection guides the next step

Coolants are not interchangeable, so selecting fluid by convenience can reduce the protection intended for the system. Colour is not a reliable guide to what is in the bottle. David McDavid Ford can service the system using the manufacturer-specified coolant for this vehicle.

• Follow the manufacturer's specified coolant type
• Use the specified concentration for the refill
• Do not choose coolant by colour alone

Check the system only when it is cold; a cooling system can be hot and under pressure after the vehicle runs. Adding fluid may address the level temporarily, but it does not identify why the level changed. A pressure test can help separate needed coolant service from a repair concern.

• Top-off restores level only
• Depleted additives remain depleted
• A repeatedly low level calls for leak inspection

The Service Department is at 300 West Loop 820 South, Fort Worth, TX 76108. Booking the visit allows the team to evaluate coolant condition and pressure-test the system. You can also review current service specials before scheduling.

• Schedule online through the service appointment page
• Call 817-420-7990 for assistance
• Visit 300 West Loop 820 South in Fort Worth