David McDavid Ford
2010 Ford Explorer Oil Change
Ford Oil Change service at David McDavid Ford in Fort Worth, TX
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
11 common questions answered
What engine does the 2010 Ford Explorer have?The 2010 Ford Explorer has a 4.0-liter V6 engine producing 210 horsepower and 254 lb-ft of torque.
The engine uses regular unleaded fuel and reaches peak power at 5,100 rpm. Peak torque arrives at 3,700 rpm, supporting the Explorer’s SUV utility and towing capability. David McDavid Ford in Fort Worth can help maintain the engine with scheduled oil and filter service.
- 4.0-liter displacement equals 4,009 cc
- V6 engine layout with automatic transmission
- Five-speed automatic transmission
What gas mileage does the 2010 Ford Explorer get?The 2010 Ford Explorer is rated at 13 mpg in the city and 19 mpg on the highway.
Its 22.5-gallon fuel capacity supports longer drives between fill-ups. Actual fuel use can vary with traffic, driving habits, cargo, and drivetrain configuration. Fort Worth drivers can schedule service at David McDavid Ford to help keep essential systems operating as intended.
- 13 city mpg
- 19 highway mpg
- 22.5-gallon fuel capacity
How much can a 2010 Ford Explorer tow?The 2010 Ford Explorer has a maximum towing capacity ranging from 7,025 to 7,115 pounds across its three trims.
This range reflects differences between trims rather than one single figure for every Explorer. Towing places additional demands on the engine, transmission, cooling system, and tires. David McDavid Ford’s Fort Worth service team can perform an oil change and inspect fluid levels as part of vehicle care.
- Maximum towing range: 7,025 to 7,115 pounds
- Four-wheel-drive or all-wheel-drive configurations
- Five-speed automatic transmission
What does an oil change for a 2010 Ford Explorer include?An oil change includes draining and refilling the engine oil, installing a new oil filter, resetting the oil-life monitor, and checking underhood fluid levels.
The service is designed around the engine’s specified oil grade and capacity. Oil can lose its ability to carry heat and debris before it looks visibly dirty, so appearance alone is not a reliable service guide. David McDavid Ford performs this work in Fort Worth and logs the visit against the vehicle’s history.
- Oil drained and refilled to the specified grade and capacity
- New oil filter installed
- Oil-life monitor reset and underhood fluids checked
How do I know my 2010 Ford Explorer may need an oil change?An oil-change reminder, mileage past the last service, dark or low oil on the dipstick, or a louder ticking engine note can signal that service is due.
Engine oil loses additives and heat-carrying ability over time, even when it does not look heavily contaminated. A low level should be addressed promptly because oil supports lubrication and heat management. Fort Worth owners can book service with David McDavid Ford for an oil and filter replacement.
- Oil-change reminder light or mileage past the last service
- Dark or low oil on the dipstick
- Ticking or louder engine sound at startup
Is the 2010 Ford Explorer available with four-wheel drive?The 2010 Ford Explorer is offered with four-wheel-drive or all-wheel-drive configurations across its three trims.
Drivetrain availability can vary by trim, so shoppers should confirm the configuration of a specific vehicle. Four-wheel-drive and all-wheel-drive systems add components that benefit from appropriate inspection and maintenance. David McDavid Ford serves Fort Worth drivers at its West Loop 820 location.
- Four-wheel-drive configuration available
- All-wheel-drive configuration available
- SUV body style with automatic transmission
How much cargo space does the 2010 Ford Explorer have?The 2010 Ford Explorer provides 13.6 to 45.1 cubic feet of cargo space behind the rear seats across its three trims.
The range reflects differences among the model’s trims. Its SUV body style combines passenger transport with useful cargo flexibility for errands, equipment, and travel. Regular maintenance helps keep the Explorer ready for daily Fort Worth driving.
- Cargo range: 13.6 to 45.1 cubic feet
- 193.4-inch overall length
- 113.7-inch wheelbase
Where can I get a 2010 Ford Explorer oil change in Fort Worth?David McDavid Ford provides 2010 Ford Explorer oil-change service at 300 West Loop 820 South in Fort Worth, Texas.
The service includes the oil and filter replacement, oil-life monitor reset, and underhood fluid-level check. Drivers can use the service scheduler to request an appointment before visiting the dealership. David McDavid Ford also offers service specials and parts specials through its online resources.
- Location: 300 West Loop 820 South, Fort Worth, TX 76108
- Schedule service online
- View service specials
2010 Ford Explorer Oil SpecificationsOil service for the 2010 Ford Explorer includes draining the used engine oil and refilling it with the grade and capacity specified for the vehicle. A new oil filter is installed, the oil-life monitor is reset, and underhood fluid levels are checked. These steps address the core maintenance needs identified for this service without substituting an unsupported oil grade, capacity, or service interval.
Engine oil gradually loses additives and its ability to carry heat and debris, even when it does not appear heavily soiled. Drivers may first notice an oil-change reminder, mileage past the last service, dark or low oil on the dipstick, or a louder ticking sound during startup. Service records help document completed maintenance and keep the vehicle’s history organized.
Bring your 2010 Ford Explorer to David McDavid Ford in Fort Worth for an OEM-spec oil change — schedule service.
2010 Ford Explorer Oil Change Service in Fort WorthDavid McDavid Ford serves Fort Worth drivers from 300 West Loop 820 South, providing oil-change service for the 2010 Ford Explorer. The visit includes draining and refilling the oil, installing a new filter, resetting the oil-life monitor, and checking underhood fluid levels. Booking the service creates a record of the oil and filter replacement against the vehicle’s history.
Texas driving can involve stop-and-go traffic, extended highway travel, heat, cargo, and towing duty cycles. Those conditions make consistent attention to engine oil and fluid levels important for an SUV with a 4.0-liter V6 engine and towing capacity ranging from 7,025 to 7,115 pounds. Ford Mobile Service and Ford Pickup & Delivery options are also available through the dealership’s service operation.
For directions or assistance, contact David McDavid Ford at 817-420-7990, or visit 300 West Loop 820 South, Fort Worth, TX 76108.
What's Included in a 2010 Ford Explorer Oil ChangeThe service begins by draining the used engine oil and refilling the engine with the oil grade and capacity it specifies. A new oil filter follows, helping remove contaminants from the circulating oil. The technician then resets the oil-life monitor so the vehicle’s maintenance tracking reflects the completed visit.
The underhood fluid levels are checked as part of the appointment. The service is intended to address routine oil and filter maintenance while documenting the work in the vehicle’s history. Drivers should respond to an oil-change reminder, low or dark dipstick reading, or ticking startup noise rather than relying only on the oil’s appearance.
Schedule service for your 2010 Ford Explorer at David McDavid Ford in Fort Worth, or call 817-420-7990. You can also review parts specials before your visit.
Related Pages
Helpful Links

